A Tale of Two Cities Humor Essay

Humor in A Tale of Two Cities This novel is filled with humor but one scene that catches attention as humorous is in Chapter one of the Second Book, Jerry Cruncher is the most comical character in the book and in this particular scene he yells at his wife for praying against her. This is comical because it is so absurd especially the way Dickens depicts it. Mr.Cruncher wa kes up to find his wife praying and yells twice that she is â€Å"at it agin† (Dickens 56), so he continues to throw a muddy boot at her. Mrs.Cruncher only responds after he addresses her again, she explains that she was not praying against him but for him. This entire scene is utterly ridiculous because she was just being a peaceful wife but her husband assumes she is praying for him to be unsuccessful. He has no evidence to back up his accusation yet continues to believe it. This scene also display terrible sexism on the part of Jerry Cruncher. Humor in A Tale of Two Cities This novel is filled with humor but one scene that catches attention as humorous is in Chapter one of the Second Book, Jerry Cruncher is the most comical character in the book and in this particular scene he yells at his wife for praying against her. This is comical because it is so absurd especially the way Dickens depicts it. Mr.Cruncher wa kes up to find his wife praying and yells twice that she is â€Å"at it agin† (Dickens 56), so he continues to throw a muddy boot at her. Mrs.Cruncher only responds after he addresses her again, she explains that she was not praying against him but for him. This entire scene is utterly ridiculous because she was just being a peaceful wife but her husband assumes she is praying for him to be unsuccessful. He has no evidence to back up his accusation yet continues to believe it. This scene also display terrible sexism on the part of Jerry Cruncher. Humor in A Tale of Two Cities This novel is filled with humor but one scene that catches attention as humorous is in Chapter one of the Second Book, Jerry Cruncher is the most comical character in the book and in this particular scene he yells at his  wife for praying against her. T his is comical because it is so absurd especially the way Dickens depicts it. Mr.Cruncher wa kes up to find his wife praying and yells twice that she is â€Å"at it agin† (Dickens 56), so he continues to throw a muddy boot at her. Mrs.Cruncher only responds after he addresses her again, she explains that she was not praying against him but for him. This entire scene is utterly ridiculous because she was just being a peaceful wife but her husband assumes she is praying for him to be unsuccessful. He has no evidence to back up his accusation yet continues to believe it. This scene also display terrible sexism on the part of Jerry Cruncher.

Discuss the political, social, and cultural developments of China 1500-1900s

The period between 1500 and 1900 encompasses important years that mark the time that preceded the development of modern China. First oppressed by the Mongolian rule in the 14th century, the nation was taken over by the Ming Dynasty that sought out to rebuild centralized control and reunite the country. The Ming Dynasty was replaced by the Qing Dynasty in the 17th century, signaling the start of the Manchu rule. We will discuss in turn the political, social, and cultural developments in China in that time period. Political Life The Ming DynastyComing to the nation as a break from the hated Mongolian dominance, the Ming Dynasty was started by a Han Chinese farmer and a Buddhist monk. In the early 16th century, its heyday when China conducted intense sea expeditions with the aim to conquer the surrounding area and challenge the Mongol expansion was to a great extent over. The Ming Dynasty had to engage in prolonged wars with Mongols to challenge their dominance and protect its borders. In the meantime, its own coastal areas were often attacked by the Japanese pirates that gave Ming emperors a lot of headache.In the north, even the construction of the world’s best known fortification, the Great Wall, did not prevent the attacks of the Mongols. As a result, the Ming emperors in the 16th-17th century were much weaker than their predecessors, like the powerful Zhu Yuanzhang who founded the dynasty in the early 14th century. In addition, internal conflicts were plaguing the court since â€Å"the harassed emperors abandoned more and more of their responsibilities to eunuchs† (Encarta). The Ming started a war with Japan in 1592 when they sent their troops to help the Korean allies to defend themselves against Toyotomi Hideyoshi.This turned into a prolonged warfare that lasted over seven years and dealt a heavy blow to the Ming’s treasuries. The result was an increase in social tensions all over the country. An example is the peasant rebellions in Nor th China that started in 1628. These revolts finally led to the demise of the Ming Dynasty. A hefty rebellion occurred in 1642 when the dikes of the Huang He were cut by a rebellious group, leading to a flood and a starvation thereafter. The assault on Beijing, the capital used by the Ming, in 1644 resulted in the seizure of the city by the rebels and suicide of the last representative of the dynasty.The Qing Dynasty The Ming was replaced by the Qing Dynasty. As is often the result of a politically weak structure, their rule was in fact a foreign invasion since the Qing rulers were not Han Chinese, but Manchu. In order to be accepted by the Han Chinese majority, they retained a lot of customs of the Chinese and even upheld the Confucian tradition, nevertheless they always remained different from the Han Chinese. Thus, they also imposed some of their customs and traditions on their Chinese subordinates.They forced, for example, the Han to pick up the queue in the Manchu haircut style and to dress in their fashion, in this way replacing the traditional Han pigtail. To this day the Chinese wear â€Å"Qipao (bannermen dress) and Tangzhuang† that actually come from the Manchus (Encarta). It is noteworthy in which way the Manchus forced the Chinese to adopt these styles: the penalty for non-compliance was death. In the political system, the two groups were also separate. As the ruling ethnicity, the Manchus outnumbered the Han Chinese in the highest-ranking offices in the capital.However, there were still a lot of Chinese in other offices in the provinces. The Manchus, as mentioned before, were quick to adopt the philosophy of Confucianism that called on subordinates to obey the emperor. With those means, they were quick to bring the nation to obeyance and reinstate order in the provinces. With that accomplished, the Qing Dynasty also took pains to enlarge the empire through conquests and military raids. They attacked the Mongols, conquering the Outer Mongoli a in the 17th century. In the next century, they added to the empire the territory of Central Asia and set up a protectorate in Tibet.With time, they also gained control of Taiwan. With the efforts of the Qing Dynasty, almost all danger to China Proper had been eradicated. In the 19th century, the Qing Dynasty entered a period of steady decline. Their control of the country became weak, and the nation once again plunged into a state of social tension and economic troubles. The Opium Wars began with the First Opium War in 1840, triggered by the desire of Britain to control the lucrative opium trade in China. The desire of the Western nations to control â€Å"concessions† in China led to unfavorable peace treaty following the First Opium War.The Opium Wars resulted in the Treaty of Nanking in 1842 and the Taiping Rebellion in 1851-1864 and the Boxer Rebellion in the same century. As a result of military campaigns and rebellions, the control of the Qing over the country became e ven weaker. Social Life Under the Manchu rule, the nation was dominated by foreign rulers who imposed their rules and traditions on everything. In addition, they also made efforts to keep themselves separate from the mainstream Chinese life. For example, marriages between the Manchus and the Han Chinese were prohibited.The Chinese could not move permanently into the traditionally Manchu lands, and occupations such as trade or manual labor were reserved only for the Han as the Manchus were prohibited to do these jobs. In many administrative positions, the office was taken by the Manchu person and the Chinese counterpart so that the Manchu official could check in on his Chinese colleague. The Qing rulers also imposed some of their customs and traditions on their Chinese subordinates. They forced, for example, the Han to pick up the queue in the Manchu haircut style and to dress in their fashion, in this way replacing the traditional Han pigtail.To this day the Chinese wear â€Å"Qipa o (bannermen dress) and Tangzhuang† that actually come from the Manchus (Encarta). It is noteworthy in which way the Manchus forced the Chinese to adopt these styles: the penalty for non-compliance was death. Cultural Life The years under the rule of the Ming and the Qing Dynasties were an important period in Chinese culture. The Ming rule is marked by the arrival of the Europeans, among them a lot of Christian preachers. Particularly noteworthy were â€Å"Jesuits, members of a Roman Catholic religious order, showed respect for Chinese culture and overcame the foreigners’ reputation for lawlessness† (Encarta).The Jesuits tried to integrate with the local reality, learning the Chinese language and setting up settlements in the nation from which they could disseminate their religion. One of the important leaders in the Christian community was Mateo Ricci who took effort to learn Chinese and settled down in China. In intellectual life, as said, Confucianism was the dominant influence. The government placed emphasis on conforming to the official interpretation of Confucius’ writings consistent with the one provided by Zhu Xi. For centuries, his interpretation was considered standard, and deviation was not permitted.However, in the later Ming period, a few dissenting ideologies emerged, among them one proposed by â€Å"Wang Yangming, a scholar-official who rejected Zhu Xi's emphasis on the study of external principles and advocated striving for wisdom through cultivation of one’s own innate knowledge† (Encarta). Although the Qing Dynasty was of Manchu, not Chinese origin, they also invested effort in the development of the Chinese culture. Thus, they engaged in projects devoted to Chinese literature in history. In fact, their efforts helped preserve a lot of Chinese ancient literary works.An outstanding effort was made by Emperor Kangxi who â€Å"ordered the creation of the most complete dictionary of Chinese characters eve r put together at the time† (Encarta). The project on compiling the list of the important works related to Chinese culture was undertaken in the reign of Emperor Qianlong. Conclusion China in the period ranging from 1500 to 1900 experienced many events that left a deep imprint on modern China. Torn together by many different rulers, it nevertheless managed to maintain its unique culture and build upon it.It remained loyal to the ideals of Confucianism that were consistently implemented by the powerful monarchs who used the ideology to demand obedience. The rise of the Ming Dynasty was followed by its decline, the end of a cycle that opened the way to new rulers, the Manchus. Even being foreigners, they left a great deal of Chinese customs in place and left China even more culturally developed than it was. Even so, by the end of the nineteenth century, the nation was weakened politically and was heavily influenced by European powers.

Introduction to Export Finance Essay

Credit and finance is the life and blood of any business whether domestic or international. It is more important in the case of export transactions due to the prevalence of novel non-price competitive techniques encountered by exporters in various nations to enlarge their share of world markets. The selling techniques are no longer confined to mere quality; price or delivery schedules of the products but are extended to payment terms offered by exporters. Liberal payment terms usually score over the competitors not only of capital equipment but also of consumer goods. The payment terms however depend upon the availability of finance to exporters in relation to its quantum, cost and the period at pre-shipment and post-shipment stage. Production and manufacturing for substantial supplies for exports take time, in case finance is not available to exporter for production. They will not be in a position to book large export order if they don’t have sufficient financial funds. Even merchandise exporters require finance for obtaining products from their suppliers. This project is an attempt to throw light on the various sources of export finance available to exporters, the schemes implemented by ECGC and EXIM for export promotion and the recent developments in the form of tie-EXIM tie-ups, credit policy announced by RBI in Oct 2001 and TRIMS. Concept of Export Finance: The exporter may require short term, medium term or long term finance depending upon the types of goods to be exported and the terms of statement offered to overseas buyer. The short-term finance is required to meet â€Å"working capital† needs. The working capital is used to meet regular and recurring needs of a business firm. The regular and recurring needs of a business firm refer to purchase of raw material, payment of wages and salaries, expenses like payment of rent, advertising etc. The exporter may also require â€Å"term finance†. The term finance or term loans, which is required for medium and long term financial needs such as purchase of fixed assets and long term working capital. Export finance is short-term working capital finance allowed to an exporter. Finance and credit are available not only to help export production but also to sell to overseas customers on credit. Objectives of Export Finance: * To cover commercial & Non-commercial or political risks attendant on granting credit to a foreign buyer. * To cover natural risks like an earthquake, floods etc. An exporter may avail financial assistance from any bank, which considers the ensuing factors: a) Availability of the funds at the required time to the exporter. b) Affordability of the cost of funds. Appraisal: Appraisal means an approval of an export credit proposal of an exporter. While appraising an export credit proposal as a commercial banker, obligation to the following institutions or regulations needs to be adhered to. Obligations to the RBI under the Exchange Control Regulations are: * Appraise to be the bank’s customer. * Appraise should have the Exim code number allotted by the Director General of Foreign Trade. * Party’s name should not appear under the caution list of the RBI. Obligations to the Trade Control Authority under the EXIM policy are: * Appraise should have IEC number allotted by the DGFT. * Goods must be freely exportable i.e. not falling under the negative list. If it falls under the negative list, then a valid license should be there which allows the goods to be exported. * Country with whom the Appraise wants to trade should not be under trade barrier. Obligations to ECGC are: * Verification that Appraise is not under the Specific Approval list (SAL). * Sanction of Packing Credit Advances. Guidelines for banks dealing in Export Finance: When a commercial bank deals in export finance it is bound by the ensuing guidelines: – a) Exchange control regulations. b) Trade control regulations. c) Reserve Bank’s directives issued through IECD. d) Export Credit Guarantee Corporation guidelines. e) Guidelines of Foreign Exchange Dealers Association of India.

Supply chain Technologies Case Study Example | Topics and Well Written Essays - 3000 words

Supply chain Technologies - Case Study Example The U.K. high street fashion industry is a complex business with an estimated 44.5 billion in annual revenues (Barlow, 2006). It includes a wide range of enterprises in the apparel, footwear, home textiles, and accessories markets, full-price and discount retailers, and design source and selling companies. Some have their own manufacturing facilities whilst others outsource production but retain control over parts of the production process. Dominating the highly-competitive UK fashion market is Marks & Spencer, followed by discount fashion specialist brands such as Primark and TK Maxx, all competing with Burberry, Italy's Prada, Chloe (France), Hugo Boss (Germany), and Donna Karan (U.S.). Fashion and apparel manufacturing has almost disappeared in the U.K. due to cheap imports from China, which has likewise developed into a manufacturing base for the established global brands. U.K. manufacturing is focused on specialist fashion clothing and luxury products, mostly for wealthy customers in developed countries. The industry is marked by the integration of manufacturers and retailers, with the top three U.K. fashion retailers - M&S, Next, and Arcadia - remaining vertically integrated, producing and retailing their own brands. The other high street fashion brands prefer specialist retailers, outsourcing their production in different countries and sending the finished products to the U.K. The industry continues to be driven by retailers rather than manufacturers and marked by the growing polarisation between discounters and full-price retailers. The highly competitive nature of the business will continue to intensify. Full-price retailers need to capitalise on young consumer demand for distinctive designs, quality materials, and individual styles sold as "fast fashion" with items offered for a limited time before new styles are released (Doshi, 2006). The industry's operational requirements have changed in the last twenty years, since the time when high street fashion houses sourced most of their raw materials from U.K. textile manufacturers. These were then transformed by U.K. designers, most with their own production facilities, into wearable apparel or accessories for domestic and export sales. Under this traditional system, high street fashion houses competed on the basis of designs, quality brand image, and productivity and were able to command higher margins. However, with the rise of global production centres in Asia and Latin America, not only for textiles but also for finished high-quality apparel, most high street fashion houses are being squeezed towards the higher value-added design and brand marketing activities and feeling greater pressure to outsource production and improve operational management efficiencies. Aside from the growing power of consumers, price discounting pressures, and design copyright problems, the industry faces the following major operations management issues: 1) complexity of the supply chain; 2) speed to product launch and delivery; 3) managing the product mix; 4) inventory control maintenance; and 5) fast-changing technologies. Airlines The airline industry consists of a wide range of companies, from those with a single airplane carrying mail or cargo through full-service international airlines operating hundreds of airplanes of various types. These companies

Students should be able to understand and explain the main theories of Essay

Students should be able to understand and explain the main theories of organizational management and leadership and their application - Essay Example Management comprised of the following functions namely planning, organising, directing, staffing, co-ordinating, reporting and budgeting (Thenmozhi, n.d.). The X-Y theory was first conceptualised by Douglas McGregor, an American social psychologist, in the year of 1960. It refers the statutory and simple rules of managing people. There are two theories X and Y. In X theory, the nature of the persons are lazy. Mostly they dislike work and try to avoid it therefore most of the employees are subject to negative reinforcement and threatened by it. Such persons avoid responsibility and prefer to be directed. The exactly opposite picture can be shown in Theory Y. Here, people accept and seek responsibility. To achieve the organisational objective people usually apply self control and direction. Even, they are also rewarded for their commitment (Business Ball, n.d.). William Ouchi had developed Z theory in 1981. Basically this theory is referred to as ‘Japanese’ management style. This theory advocates the combination of theory Y along with the modern Japanese management. It indicates a large amount of freedom and trust with worker and it has been assumed that workers have a strong interest and loyalty (Business Ball, n.d.). A series of studies had been conducted at the Western Electronic Hawthorn Works from 1927 to 1932. Here, the professor Elton Mayo had experienced the impact of work conditions in the employees’ productivity. He had started this through examining the environmental and physical influence of the work place and then he moved towards the psychological aspects and its impact on the employee motivation. The outcome of the study exhibits that the employee productivity is fuelled by the psychological stimulus. It can be applied in the practical life also. Suppose, a management trainee has joined in an organisation and the management provide him training, separate work code etc. Thus, silently the

The summary of Million Dollar Arm Movie Review Example | Topics and Well Written Essays - 500 words

The summary of Million Dollar Arm - Movie Review Example To finance the trip, training and all the other requirements for the scheme, Bernstein convinces an investor and extremely wealthy business owner, known as Mr. Chang to help them. Bernstein convinces the investor to create and support a show called â€Å"Million Dollar Arm†, which they will use to get the right, skilled players that they are looking for once they go to India. Once the two partners arrive in India, Amit, a local man who likes baseball befriends them and Bernstein hires his as his interpreter. In addition, Bernstein ensures that he goes to India with a major league scout called Ray. Bernstein believes Ray will help him in eliminating through the thousands of candidates who are there to compete. At first, things do not seem to be going as planned. Contrary to his luxurious life that he used to in United States, Bernstein is shocked to see the overcrowded cities in India and traffic that did not seem to end (Million Dollar Arm). The overcrowding and traffic made it harder for the group to move from one city to the next, looking for new players. He also learns that since most of the candidates are cricket players they have different pitching techniques from those of baseball players. In addition getting players who were willing to train and become baseball players within a year was not easy. It was only after a prolonged search he found two young men that were eager to try out the new pitching motions in an entirely new sport. The two new prospects, Dinesh and Rinku are trained by a baseball coach known as Tom House (Million Dollar Arm). Bernstein takes them back home for more training. After training vigorously and participating in different ways when in front of professional scouts and the media from around the world, they fail. The investor almost gives up on Bernstein’s plan, when he learns that the two players cannot

The German Nation and Martin Luther Essay Example | Topics and Well Written Essays - 250 words

The German Nation and Martin Luther - Essay Example His theses were printed and distributed all over Europe in a span of three months. Among his biggest criticisms was the Pope’s role in raising money, an act that made him one of the richest men of his time. His argument was that the Pope should have used his wealth to help the needy in society. David’s unrelenting battle with the church got him exiled a few months after the formation of the Diet of Worms Council in 1521. A group of Martin Luther’s supporters who wanted to make him a martyr formed this council. Arthur states that in 1523, Martin Luther published the German version of the Pentateuch before producing an edition of the New Testament, in 1529 (254). This marked the beginning of the translation of the Bible into many languages and task that is still being practiced up to date. In addition to this, Luther wrote several hymns, hence marking the beginning of singing during congregational services. Presently, hymns are sung in Christian church services all over the world. His matrimony to a woman, who was herself an ex-nun, introduced the concept of marriage among Christian clergy. This act was unheard of among priests in his time. They had a large family and lived a simple life.

Steroids Research Paper Example | Topics and Well Written Essays - 1250 words - 1

Steroids - Research Paper Example Recently, steroids have been in discussion with the media. In addition, many sports related persons are heard or seen on media charged with the steroid abuse. However, steroids are comprised of several different names for example stackers, pumpers, gym candy, weight trainers, roids, gear, Arnolds (Lau ) and the most popular one is juice (Freedman 64). In recent years steroids are being used in the treatment of many diseases like asthma, lack of proper growth, cancer, osteoporosis and other skin related disease (Freedman 64). They are defined as a â€Å"class of lipids having a particular molecular ring structure called the cyclopentanoperhydro-phenanthrene ring system. Steroids differ from one another in the structure of various side chains and additional rings. Steroids are common in both plants and animals. In humans, steroids are secreted by the ovaries and testes, the adrenal cortex† ("Steroids." 1-1). Moreover, the chemical substances that are produced in the human body in order to control the metabolism are known as hormones. The hormones act as a courier that controls the actions of the body by sending messages to the body tissues (LeVert 96). Similarly, steroids are also like hormones, they are substances prepared in the laboratory and are known as synthetic steroids that are used for the treatment of medical issues (Freedman 64). The hormones in males for example testosterones are responsible for the improvement of male distinctiveness such as facial hairs, intensifying male voices or bu lky muscles. Males produce large amount of testosterone that helps in enhancement of male features. Anabolic steroids are also derived from male sex hormones testosterones. In addition, steroids are used by many health professionals for the treatment of several diseases but these steroids can be availed only by the medical prescription (Freedman 64). These are the natural steroids produced in the human body by a gland known as the adrenal cortex.

Juvenile Probation Essay Example | Topics and Well Written Essays - 1000 words

Juvenile Probation - Essay Example Additionally, probation officers ensure that juveniles who are placed on probation abide by their probation rules, receive appropriate Court related services, are referred to other community services when necessary and coordinate with schools, agencies, employment/training programs and other services within the community". (2006a) "The Juvenile probation officer supervises and reports on the conduct of youth offenders committed to the state's custody as ordered by the judge. He also assess the youth's needs, develop and coordinate case plans in the community or correctional setting, arrange for and coordinate community services that support the youth's plan, monitor the youth's behavior to make certain he or she follows the provisions of the parole or probation agreement, and enforce court orders". (2006c) The foremost responsibility of the probation officer is to conduct regular meetings with youth in order to establish a healthy relationship and support just after the release from state care and custody. The probation officer is responsible for attending case review of youth, research youth's background, family situation, school record and past criminal behavior; formulate and present recommendations to the court, correctional professionals and service providers regarding the suitability of youth offenders for release under probation. ... d and past criminal behavior; formulate and present recommendations to the court, correctional professionals and service providers regarding the suitability of youth offenders for release under probation. Probation officer also checks the availability of community resources to support the youth and families when released. He takes care of the family by collaborating with other professionals who can help the family and youth in providing support services like educational or job training, drug or alcohol treatment, and other court ordered actions such as payment of restitution or community volunteer work. Probation officer also plans objectives and court orders. (2006c) In order to bring about an improvement in environmental conditions, the probation officer uses three types of treatment: (1) removal of the child, where the home is hopelessly inadequate; (2) transplanting the home into another neighborhood, where the influence of the family itself is good, but not strong enough to counteract the bad influences of the neighborhood; (3) case work on the family, where the physical surroundings of the home and neighborhood are adequate but where personal relationships are not conducive to harmony and happiness. Case Management Monitoring: Probation officer is liable to monitor youth's adjustment to placement environments and conduct regular meetings with youth to encourage and monitor the youth's progress. Visiting: "He visits youth at approved placement, schools and places of employment to monitor juvenile's performance. Often the probation officers investigate alleged probation violations by searching for evidence". (2006c) Responding: "Probation officer responds to emergency situations and diffuses aggressive behavior of youth by taking him into custody. Arrange

Operational Systems in Early Years Essay Example for Free

Operational Systems in Early Years Essay Structure of the day is one operational system that needs to be in place within an early years setting. This is because, it allows the setting to run smoothly as everyone knows what they need to do and when. Operational systems and financial systems are important elements of a business plan which enable a service to run efficiently. There are many operational systems and financial systems involved in a service. Task 2: Structure of the day: There are many ways in which this operational system impact on early years or play works services. It allows everyone to know their roles and what they need to do throughout the day. This will allow the service to run smoothly as people will not be wondering what needs to be done and things will then get done correctly instead of being left. Due to this, things like forms for the amount children eat and their behaviour will also be carried out correctly as there will be a designated member of staff who has to fill in the paper work for the room they are working in by the end of the day. If the setting has structured the day well enough then the member of staff will have time to write up the information as it comes instead of doing it all at the end of the day. This is because, if the practitioner leaves it until the end of the day, they may forget important bits of information and therefore will not be able to report back to parents correctly. This operational system also helps to keep the organised. However, there are a few problems with this operational system. If a member of staff rings in sick then it may be hard to find cover and therefore, the structure of the day will be jeopardised. Due to this, the day will not run smoothly as there will not be enough members of staff in the setting, meaning that everyone will be panicking and jobs and paperwork will not get done correctly. Especially if the member of staff who has rang in sick is designated with important jobs for that day. It may also be the case that other people are unaware of how to carry out the member of staff jobs and therefore, they will not get done until that member of staff comes into work. If some job roles are linked together, i.e. paperwork then this could also mean that other jobs cannot get done. As a result, the structure of the day will be ruined and the setting will not run smoothly. For this operational system to work effectively there needs to be correct effective communication in place. However, if this does not happen then this operational system wills no work. Health and safety: This operational system has a huge impact on early years or play works services, and it is very important to keep a service running smoothly and effectively. However, there are many positive and negatives points to this operational system. It keeps staff, children, visitors and anyone who may enter or work in the service safe. This happens as the operational system will include task like carrying out a risk assessment daily to reduce the risk of hazards and anyone getting injured. Due to this, the system can be made suitable to the specific setting as each setting may have different hazards. Also, each setting has different health and safety requirements; this is why it is important to have an operation system to each individual service so it fits in correctly and will work appropriately. This system will outline the procedures the staffs need to know and follow to abide to the healthy and safety rules. Due to the setting making them themselves, they will be able to make them simple enough for everybody to understand and follow. This will ensure that the healthy and safety within the setting will be followed correctly and there will be a reduced risk of people getting hurt. Members of staff will also be aware of what to do if a child falls poorly whilst attending the setting. Another positive is that it will give the staff, parents and children a sense of security as they will know they are safe and are able to relax. Therefore, there will not be any one getting stressed, worried or frustrated at the thought that someone might get hurt, as all hazards should have been removed to reduce the chance of this happening. On the other hand, there are also negative points about health and safety as an operational system. This is because, it can be quite time consuming for the setting to create, therefore this may be taking up members of staff valuable time that needs to be spent else where. Due to this, another part of the setting may not run as it should, for example, lunch time. There may not be enough members of staff helping out at that time if some are busy creating and readjusting the operational system. Also, to add to the time of creating it, someone needs to take the time to review the system and add or take away things when it needs updating. This could be very costly to the service because they will have to pay for things like the system to be printed, staff training on the different systems, and health and safety is a big system for staff to become knowledgeable about. Security of the building: The main impact that security of the building has on early years or play work services, is that it keeps everyone safe. Settings will have equipment installed to ensure that only the correct people are entering the building, for example, they may have a bell or a password on the main entrance door, and other doors are only able to be opened from the inside. This also means that they are able to adapt the building however they need. Some nurseries may have to have walls, gates or fences built around their outdoor play area. However, some building may not have to do this as there is already a wall there. Due to this, the setting will also be able to install equipment that will be suitable to the children’s needs. Some settings may have high door handles that the children cannot reach so they can’t let themselves out or open the door and get their fingers trapped in it. A sense of security will also be built up in the setting as everyone will be aware that it is secure and safe. This may also make parents feel better leaving their child at the setting. However, like any operational system, this one also has negatives aspects. Finding a good quality company to get the equipment off and for them to install it may become difficult. A setting will need a reliable company who is willing to come out at late notice when possible to install equipment. The setting also needs to be able to find a company that has their equipment at a reasonable price or else it may become very expensive for the setting. If a good quality company cannot be found, then equipment could be faulty putting the staff, children and visitors safety at risks. It could also then take a long time for the setting to be able to get the equipment fixed, causing problems and unneeded stress. As some equipment might be seen as good, there are also some impractical equipment, for example, if the setting has a bell for people to get in, it may be too loud and then wake up the children who are trying to sleep. Task 3: Within an early years or play work setting there is an operation system for the management and ordering of supplies. One current operational system that I have witnessed was at my primary school. Each classroom teacher recorded the supplies that they might need throughout the term, including books, pencils, paint, games, and work sheets and so on. Once they had done this, they then had to send their list to the lady in the office who would record what supplies the teachers requested onto an ordering form. She would also keep a record of what each teacher asked for so everyone could have the correct stuff. When it came to ordering things like food for school dinners, this was the chef’s responsibility. Each morning, the classroom teacher would ask each child who was having hot dinners what they would like, and there would be a meat and a vegetarian option. From this the chef would then be able to cook the correct amount of food each day. To order fresh food, the chef would do this once a week handing the order list to the office. However, with things like tin food, this would be brought in bulk at the beginning of each half term. For cleaning equipment, the head cleaner would create the ordering form to give to the office and this would include providing cleaning wipes for tables outside each classroom and soap for the toilets and so on. When it comes to the management of the operational system, this is down to the lady in the office as she is the one who rings through to the companies and places the orders and makes a time and date in which everything can be delivered. She keeps a record of past orders to make sure they are roughly ordering the same things each time an order is put in. This will help financial budgets as well. I do believe that the schools ordering of supplies operational system works effectively. The operational system is working well because there is someone to monitor what is being ordered and manage the system. This helps so staffs are aware who to send their order form to, if there are any problems then there is also someone that they can approach to try and solve the issue. All staff is able to put in an ordering form so nothing gets missed and the person in charge is then able to check the orders to ensure that staff are not spending too much money and are being realistic so the school can afford it. The school order supplies at realistic times to ensure that they do not run out of things they need especially things like hot dinners for the children. As a school, they have built up a good relationship with their suppliers and in time of need they can get a next delivery if something drastic happens. Another good point about this operational system is that the person, who manages it, also manages the financial records meaning that they will have a good understanding of what is coming in and going out. They will also be knowledgeable of how to make orders and will know appropriate times in which it can be delivered. however, the only problem is, if the member of staff who always puts the orders through is off work due to sickness, holiday or anything then it could mean that the school do not get there order through on time as know one else will know how to do. Therefore it would be a good idea for them to allow another member of staff knows how to do it so they can make an order if needs be. Schools need financial resources to function. School finances should be carefully managed according to regulations. Financial summaries provide information about the flow of a school’s financial resources, both into the school (income or revenue) and out of the school (expenditure). Financial records within the school are kept within the management office together with all supporting documents, e.g. receipts, invoices, bills and payment records. Access to financial records is restricted to the head teacher and member of staff in charge of the finance. The school has to keep their financial records for a minimum of 5 years. Financial records are kept both on the computer and in filing cabinets. The school has a spreadsheet on the computer in which everything they have to pay for is listed and all the incoming money is also listed. The financial records that are kept in the filing cabinet include things like receipts for orders, and things that they cannot put on the computer. Receipts allow the school to look back to ensure that the money going out is the same as the receipts for things that they have brought. The school has to record their financial income and expenditure. Income that the school records include: school fees, renting out facilities, donations, local community, government and expenditure that the school record includes: construction/repairs, equipment, and rental of premises, teacher salaries, school meals, electricity, telephone, water and maintenance. The school uses the financial summaries to monitor, verify and control the financial position of the school. Bibliography: Gill Squire. (2007): BTEC National Diploma Childrens Care Learning Development: Essex

LED TV Technology Overview Engineering Essay

LED TV Technology Overview Engineering Essay This paper discusses the Light Emitting Diode (LED) technology and the impact it shall have on television applications. The paper highlights the advantages and challenges for these applications and explore the specific advantages that LED technology has for DLP (Digital Light Processing) product applications. Introduction With a wide variety of applications, the LED has become a pivotal illumination technology.Since their initial invention, LEDs have been used in many diverse applications such as watches, calculators, remote controls, indicator lights, and backlights for many common gadgets and household devices. The technology is advancing at a rapid pace and as the brightness and efficiency of LEDs increases, new applications continue to emerge. From the early 1900s, scientists have been discovering ways to generate light from various materials. In 1907, Henry Joseph Round discovered that light could be generated from a sample of Silicon Carbide (SiC). For the next 50 years, scientists continued to discover the light emitting properties that exist with some compounds. In the 1950s, studies around the properties of Gallium Arsenide (GaAs) paved the way for the first official LED discoveries that soon followed.1 LED research began in the early 1960s, primarily at Bell Labs, Hewlett Packard (HP), IBM, Monsanto, and RCA. Gallium-Aresenide-Phosphide (GaAsP) provided the basis for the first commercially available red LEDs in 1968 by HP and Monsanto. In the early 1970s, the use of LEDs exploded with new applications such as calculators and watches by companies like Texas Instruments (TI), HP, and Sinclair. Other applications such as indicator lights and alphanumeric displays soon became the mainstream use for LEDs and continued to be so for many years.2 LED Technology Background As the name implies, an LED is a diode that emits light. The diode is the most basic semiconductor whose purpose is to conduct electrical current with some form of controlled variability. The diode in its simplest form is comprised of poor conducting materials that have been modified (or doped) to increase the amount of free electrons that are available. High electron materials (referred to as N-type materials) are combined with low electron materials (referred to as P-type materials) to form a junction for these free electrons to flow. This junction is often referred to as the PN junction. An LED is a PN junction diode semiconductor that emits photons when voltage is applied. This process of photon emission is called injection electroluminescence and occurs when electrons move from the N-type material to fill the lower energy holes that exist in 2 the P-type material. When the high energy electrons fall into these holes, they lose some of their energy which results in the generation of photons. The materials used for the P-type and N-type layers along with the size of the gap between them determine the wavelength and overall energy level of the light that is produced. Many materials have been developed for manufacturing LEDs. Aluminum-Gallium-Arsenide (AlGaAs), Aluminum- Indium-Gallium-Phosphide (AlInGaP), and Indium-Gallium-Nitride (InGaN) are commonly used for present LED architectures. AlInGaP is typically used for Red and Yellow dies while InGaN is used for Blue and Green. These materials efficiently produce photons that have wavelengths in the visible spectrum. These materials in combination with new manufacturing architectures have enabled the production of very bright LEDs that are beginning to find their way into general lighting and automotive applications. Some architectures have begun utilizing additional phosphor compounds to generate white light and are now beginning to compete with common incandescent and fluorescent lighting with much lower power and much longer lifetimes. The worldwide production of LEDs has risen to about 4 billion units per month. Manufacturing in Taiwan, Japan, and the U.S. comprises the most significant volumes with Taiwan leading with about one half of that volume overall. Much of the manufacturing involves the packaging of the LED die with a limited number of manufacturers creating the actual LED die material. Figure 1 illustrates the market size for low brightness and high brightness LEDs as a function of the total LED market.3 Low Brightness 36% High Brightness 64% ** Total LED Market: $5.74 Billion Figure 1 LED Market Segments LED Technology Breakthroughs Recent innovations in the manufacturing of the die material and packaging have resulted in ultra high brightness capabilities. The use of new materials for the substrate have allowed for improved thermal conductivity which allows for higher power consumption and net light output. This increase in light output has enabled new applications for LEDs such as automotive lighting, traffic signals, and more recently, television displays. An example of these new structures is illustrated in Figure 2. Al2O3 N Layer Quantum Wells Reflective Layer P Layer GaN Thermally Conductive Substrate Figure 2 Basic LED Structure Significant improvements in the production of Aluminum-Indium-Gallium-Phosphide (AlInGaP) and Indium- Gallium-Nitride structures have allowed for improved brightness in green and blue specifically. Additional colors such as amber and cyan are also 3 being developed at a rapid pace. These improvements enable system designs that can produce better color fidelity at near equivalent brightness to common lamp-based technologies with longer lifetimes. Additional performance enhancements include system level features like instant on, no mercury, no color refresh artifacts, dynamically adjustable brightness, and improved color gamuts. Figure 3 illustrates the gamut area for LED illumination as compared to the common reference standard (Rec. 709). LED Rec. 709 0 0 Figure 3 LED Color Gamut LED illumination provides a much larger color gamut (as much as 40% or more than the HDTV color standard [Rec. 709]), providing more accurate color fidelity. These performance attributes can be quite appealing for television applications where long life and excellent color fidelity are required. As LEDs continue to advance, their impact on television applications could be significant. Figure 4 illustrates the evolution of LEDs and their potential brightness efficiency in the coming years.4 200 Incandescent Lamps 180 W) 160 Flourescent Lamps / 140 (Lm High Pressure Arc 120 Lamps 100 Efficiency Light Emitting 80 Diodes 60 40 20 0 1940 1960 1980 2000 2020 Year Figure 4 Lighting Technology Evolution LED Technology Challenges Controlling the thermal stability of the LED die is critical to the performance and stability of LED illumination and reliability. The LED architecture inherently produces light from all sides and surfaces of the PN structure in a lambertian distribution (uniform distribution into a 180 degree hemisphere). While this might seem efficient, most of this light is actually absorbed into adjacent die, the mounting substrate, or other surfaces of the LED assembly. This absorption results in an increased thermal loading of the entire LED assembly. This heat must be addressed to obtain maximum light output and reliability. Additionally, for applications that require imaging of the light energy to a small display device (e.g. DLP ® HDTV), any light that is emitted outside of the system etendue is not useable and only adds to the heat and overall power loading. Controlling this absorption, shaping the light to match the system etendue, and maximizing the thermal efficiency to extract heat fr om the die are all critical to increasing the light output and usability of the LEDs. For traditional applications, LEDs are commonly driven in CW (continuous wave 100% duty cycle) mode. For high brightness applications, however, this is not as desirable. Since the average temperature of the PN junction 4 determines both the light output and lifetime of the LED, it is often more efficient to drive the LEDs with a smaller duty cycle. With a smaller duty cycle, the LEDs can potentially be driven to higher current loads to increase the overall light output while maintaining a lower average temperature of the PN junction. The challenge with this, however, is that the driver circuitry must be able to generate fast switching waveforms, switching large currents in as short a time as only a few microseconds. This certainly presents some challenges for the design of the LED power driver. But, solutions have already been developed with performance that easily meets these requirements. Another challenge that results from higher thermal loading is that of color shift. As the PN junction changes temperature, the output wavelength of the light can shift by as much as 10nm or more. This color shift obviously impacts the color point for that color, but also impacts the white point for the system since each of the colors are mixed to create white. Fundamentally, to stabilize this color shift, the LEDs must either be run at a lower power or maintain extreme thermal stability. However, with the implementation of some form of system feedback and proper power control algorithms, the stability of the white could be preserved while maintaining high brightness efficiency. DLP ® TV with LED Illumination TI has developed a DLP ® HDTV system to take advantage of LED illumination with brightness performance that is nearly equivalent to lamp based systems. By utilizing the latest generation of high brightness LEDs and implementing a unique feedback system, it is now possible for DLP ® HDTV designs to enjoy the benefits of LED illumination. Figure 5 illustrates the basic optical configuration of this system. Collimating Lenses Dichroic Filters Optical Integrator DMD TIR Prism Blue Array Green Array Red Array Condenser Lens Projection Lens  ® Figure 5 DLPP HDTV LED Optical Architecture Utilizing a unique feedback algorithm, TI has demonstrated that any color shift variations that affect the white point can be controlled to a tolerance beyond what the eye can detect. The current DLP ® products implementation with LED technology utilizes a TI DSP component to process system information in real time, offering superior stability over a wide range of operating temperatures while maximizing brightness and reliability. DLP ® Products Performance Advantages The rapid switching capabilities of LED technology match perfectly with the fast switching properties of DLP ® technology. By taking advantage of the high speed capabilities of the DMD and LEDs, it is now possible to utilize color refresh rates that are much higher than what exists with todays designs. It is also possible to randomize the color order. Ultimately, images can be created with higher bit depth, better motion fidelity, and higher brightness. By increasing the switching frequency of the LEDs, it is possible to drive them with increased power while minimizing the thermal loading of the PN junction. These fast switching capabilities of 5 DLP ® technology take advantage of the new LED colors that are becoming available, providing much more flexibility for multiple color configurations using a single DMD device. With a DLP ® system, the LEDs do not require polarization, reflecting the light precisely off of the DMD mirror surface. The light is used efficiently, only when it is needed. This maximizes brightness and system efficiency while reducing heat. The net result is a lower system cost with higher brightness and larger color gamuts that far exceed those possible by traditional systems utilizing other common illumination sources. Conclusion As LED technology developments continue to improve brightness and reliability, LED illumination may become more of a mainstream light source for many future applications. Future developments will be able to take further advantage of the fast LED switching time to improve video performance, enhance contrast without opto-mechanical components, and create adjustable color gamuts that far exceed the possibilities of traditional illumination sources. New products will soon benefit from these fundamental capabilities providing new, unique designs that offer instant on, better colors, and overall better picture using the speed of DLP ® micromirror arrays. With the advantages of LED and DLP ® technologies working together, it is expected that DLP ® HDTVs will provide even better performance with better reliability far exceeding any existing DLP ® HDTV product.

Rational Choice And Deterrence Theory Criminology Essay

Rational Choice And Deterrence Theory Criminology Essay Since Marchese Beccaria who, as one of the first mentioned that the real purpose of punishment is is no other than to prevent the criminal from doing further injury to society, and prevent others from committing the like offense (Baccaria 1764), many researchers as well as general community have begun to concentrate on the notion of personal choice when explaining what pushes offenders to commit crimes. Rational Choice Theory became one of the most popular concepts which support the deterrence philosophy. Although, the association between those two theories was welcomed by many, it also had its critiques and opponents. In this paper, I will explain how and to what degree, Rational Choice Theory supports the concept of deterrence. I will also discuss some of the contradictory theories and criminal behaviors that do not support Rational Choice Theory and state my opinion on consequences that this study may embrace on guilty mind concept which is, according to the criminal law, one of t he necessary elements of the crime. The concept of Rational Choice Theory is rooted in the analysis of human behavior that was established by Italian scholar named Marchese Beccaria. The main point of his examination describes the human being as a rational actor who calculates rationality using ends and means formula. According to Beccaria People (freely) choose all behavior, both conforming and deviant, based on their rational calculations, the central element of calculation involves a cost benefit analysis: Pleasure versus Pain, (Beccaria 1764). In his line of reasoning, Beccaria determined that in order to prevent the criminal or wrongdoing behavior, the form of punishment equivalent to the severity of crime committed should be implemented. The concept of punishing criminals in accordance to the crime they have committed in order not only to prevent the criminal from committing the similar act in the future(special deterrence), but also to warn the general public of the possible consequences of such behavior(general deterrence), became known as Deterrence Theory. In todays world of criminal justice, it is still seen as one of the most important aspect in the whole idea of punishment. Due to the failure of rehabilitative theories and major increase in crime rates in 1970s and 1980s, the concept of free, rational choice, based on the calculation of cost and benefits began to interest criminologist and researchers across the country. Examination of illegal decision making process began to be perceived as the key to understanding the real purpose of crime and what motivates it. During those years, Modern Rational Choice Theory emerged. Contemporary criminologist began to rely on the idea which claimed that threat of punishment tends to deter the individual from wrongdoing just as rewards tend to encourage pleasing behavior. Because of this new trend of thinking, many laws that increased mandatory sentences for numerous crimes, mainly those drug-related have been passed and executed. Did wide use of deterrence as the tool of discouraging people from committing crimes accomplished its initial goal? The answer is double sided. Violent crime rates began to indeed, drop i n mid-1990s as well as did drug offences. It was however, also due to changes in many other aspects like increase police recruitment across the country, good economic prosperity that discourages criminal behavior as well as change in mentality of people that had been subjects to violent behaviors. On the negative side, because of the fact that mandatory sentences for non-violent, drug related offences were increased significantly, the prison population also augmented significantly burdening the pockets of taxpayers. As this happened, more and more researchers began to criticize the method of punishment supported by Rational Choice Theory. Does fear of severe punishment really discourage criminals from committing crimes? Wasnt it only the philosophy of Rational Choice Theory of punishment that put the concept of deterrence in such an advantaged position in our criminal justice system and which still has such a massive impact on current crime control policy? Without any doubt, the strong connections between these two makes both theories stand out and seem very balanced and reasonable. However, as the frustration caused by some of the negative effects of their usage increased, contradictory theories began to emerge. Moreover, some criminal behaviors such as rapes and even in some cases, murders seem not to be positively affected by increased punishment as the form of deterrence for these crimes. Rational Choice Theory differs from many other criminal theories mainly because of its main principal that defines crime as a solely individual choice. The concept does not focus on other, crucial factors like individual traits, criminal associations and inner strains that may also play a huge role in pushing an individual to committing certain crimes. One of the most known models that oppose the Rational Choice Theory is Classical Theory introduced by Clarke and Cornish. Both authors agree that, while committing the crime, people are not perfectly rational and in some cases they are completely unreasonable. Moreover, they touch upon the costs and benefits of crime very broadly including only official and unperturbed permissions. According to their views, A range of factors influence and individuals estimates of costs and benefits of crime: self-control, moral beliefs, strains, emotional state, association with delinquent peers.(Clarke and Cornish, 1986). In addition, many researcher s have also found that the severity of punishment is far less important for potential criminal as oppose to certainty of that punishment. Some extreme opponents of Rational Choice Theory even believe that, People are not usually aware of certainty and severity of punishment for the area in which they live, therefore increasing certainty of punishment may reduce crime, but the effect will be short-lived and localized.(Class PPT). This opinion creates another argument which indeed questions and doubts the entire purpose of severe punishment as a successful method of deterrence and it is valid to a large extent. Besides the theoretical aspects that oppose the Rational Choice Theory, there are many practical ones that are against it as well. According to numerous scholars, individuals are much less likely to be affected by initial benefits of certain crime when they are intoxicated or mentally disturbed. Many people that commit crime are very low in self-control and often perceive the crime as simply not wrong. These individual however, are more likely to be discouraged from doing something illegal by the threat of punishment. Another study suggest that, the more severe the punishment is for a certain crime, the less likely it is for jury to execute a specific sentence; therefore it seems that as severity of the crime increases, certainty of harsh sentence decreases. If one would want to push the rational choice model to its extent, he or she may even argue that more severe and direct the punishment for the crime is in combination with negative experiences with law enforcement may actually increase the likelihood of subsequent crime. In todays world, where the access to illegal substances and alcohol is still fairly easy and domestic violent rates are still high, one could assume, without a big doubt, that offenders often commit crimes on an impulse, while intoxicated or under some emotional or mental pressure caused by, for example bad financial situation or difficult, inner family condition. What many call crime overload is certainly another problem. As crime rates increase, police forces are strained and the certainty of possible arrest decreases. As crime rates decline, police activity usually strengthens and certainty of arrest increases. The fundamental apparatus is what should be examined here. Does certainty of possible arrest daunts individual from committing a crime or does the small level of crime increase certainty? According to researchers like Marcus Felson, Stephan Pfohl and Alan Liska, some crimes and deviant behaviors, especially those considered capital offences like murder or rape with additional bodily harm are not affected by more severe punishment. The above mentioned scholars argue that capital punishment shows that anticipated, overall deterrent effect may not be present. As Pfohl claims, There appears to be little, if any, difference in rates of capital offenses between states which impose the death penalty and those that do not. In fact, an inverse correlation has been documented; when states abolish the death penalty a corresponding drop in capital crimes is reported (Pfohl, , 1994). Finally, issue regarding the effectiveness of deterrent policies and particularly the suitability of incapacitation and revenge bring up moral and official worries. How far do we really want to go in punishing criminals? Is incapacitation the most concrete use of common capitals? Looking at the widesp read understanding among criminologists that considers aging out as one of the most important elements of crime process, increasing mandatory sentences for all crimes that are believed to have been committed by perfectly rational individuals who have accurately weighted out all the costs and benefits of the crime they wished to commit, the incapacitation alone seems merely impractical. Without proper rehabilitation these individuals are very likely to commit these crimes again in the future. Great example of the modern use of punishment in accordance with Rational Choice Theory is present in the files from Atkins vs. Virginia Court Case that took place in the year 2000. Despite the fact that Atkins was diagnosed as mildly-retarded with a full IQ of 59, he was sentenced to death for committing crimes of armed robbery and murder. The case was particularly controversial because many believed that under 8th amendment which prohibits Cruel Punishment, Atkins shouldnt be sentenced to death but rather to long imprisonment. After the verdict was released, many scholars, lawyers and policy makers began to ask themselves what is the real role of 8th amendment after all? It seemed as in our country, pressure of public opinion and swiftness of prosecutors may push some cases above the supreme law of our land. I believe that the criminal research that evaluates the deterrence with the connection to the Rational Choice Theory may hold many consequences for one of the most important and valued standards in criminal law-mens rea, or in other words guilty mind. The main concept of guilty mind standard requires that a person cannot be convicted of a crime unless that person intended to commit that crime. Unfortunately, when looking at the case described above, I am wretched to admit that mens rea isnt always executed and respected. The study assessed in this paper, proves that a big portion of all crimes is committed by individuals that arent fully aware of their actions, as in the case when they are intoxicated or under tremendous mental strain. Moreover, many mentally disturbed and/or retarded criminals, even though conscious about the fact that they are taking part in criminal act, are often influenced by others who are often brains of entire process of wrongdoing. Atkins involvement in the murder for which he was sentenced to death is a great example of such situation. The measure of someones guilt is perhaps the most important factor in determining the appropriate sentence for crime that has been committed. How do we measure someones guilt? It is the moment that the principal of mens rea comes into play. Mens rea represents the amount of intend that an individual had while committing his offence. If we took Rational Choice Theory and traditional Mens rea concept and combine them together, we would get one of the most sophisticated and perfectly formulated theories that deal with understanding of criminal behavior. It could be written as follows, Since the criminal is a perfectly rational human being who, while committing the crime is fully aware of what he/she is doing and decides that benefits that will come from the crime outweigh the costs associated with punishment for this crime, than this person is guilty without the smallest doubt, intend is 100% in all the cases. As much as I would wish this theory was correct, it only reflects a utopian d ream in which all crimes and consequential punishments for them are perfectly clear and comprehensible. Reality however, is totally different and much more complex. To understand the importance of theories such as Rational Choice Theory one must often think outside the box. While the theory itself is quiet practical and compelling, without taking into consideration other aspects of crime and criminal behavior mentioned earlier in this paper, it becomes completely useless and invalid. It is because of the principal of mens rea that we need so many people in our courtrooms today, beginning with prosecutors, judges and jury, ending with psychologist, forensic scientists and psychiatrists in order to solve cases, especially those that involve murder. It is often very difficult to measure someones guilt and intend to commit such offence as murder looking solely on the crime itself and basing the explanation for it on Rational Choice Theory. Concurring with other critiques of the Rational Choice Theory I believe that the theory alone is quite misleading and all those who support it fully should consider studying it with comparison to mens rea or compare it to other counter theories like Classical Theory. If we want to respect principals of our criminal law which mens rea is a great example of, we should definitely stop the ongoing process of generalization and simplification of our legal norms and standards and apply and more ethical and just standards of practicing la w in our courtrooms.

Jack The Ripper Essay -- Papers

Jack The Ripper In August 1888, the first of a series of murders was committed by a killer who became known as Jack the Ripper. To this day the identity of the killer remains a mystery. Five women were brutally killed in the East End of London, by a maniac who appeared to kill without warning and with no remorse. 1)What can you learn from Source A? Source A tells us that the two murders were aimed directly at the poorest people in East End at the time, and usually because of the poverty at that time, the women had to revert to prostitution so this tells us that the murderer had a great dislike for poor people or mainly prostitutes, but there was no clear motive for him to do it. It also tells us that these two murders had been done with an extra amount of effort, which later becomes his signature way of murdering, so that this informs us that the killer may not have had a motive, but he knew what he was doing, so he wasn't totally insane. 2)Does Source C support the evidence of Sources A and B? Sources B and C strongly support each other, while source A differs a little. Source B is the Coroner's report on the death of Polly Nicholls. In this, it says "No unskilled person could have known where to find the organs, or to have recognized them when they were found. No mere slaughterer of animals could have carried out these operations" and in Source C the report describes how Elizabeth Stride was killed and it shows that is was done in a professional way, taking care in all the way s that she was laid out to be found and the slice across the throat "cutting the windpipe completely in two" They agree with each other becau... ...them on wild goose chase. The detective methods were also slowly evolving, so no fingerprints, DNA tests or anything could be used as they were all in the early stages of their development. There were also differences in opinion. For example Mary Kelly- Dr. Bond though her time of death was between 1:00 AM and 2:00 AM, and Dr. Phillips thought that is was between 5:00 AM and 6:00AM. This didn't help the police with the evidence of the witnesses either. The primitive ways of the police and the fact that the Metropolitan Police didn't get along with the City of London police, they were un-cooperative so this slowed down things even further. When the first victim was killed, the commissioner of the Metropolitan police was out of the country, so the officers were left to figure things out for themselves whit no guidance.

Cultural Aspects of Korean Boshintang :: Papers

Does Korean plan to serve Boshintang soup for the visitors to Seoul during the World Cup tournament? This is one question from an American to Korean English newspaper last month, condemning Koreans for eating dog as cruel abuse to animal. Some of the Western media treat Koreans as savages for eating dog meat and put it on the air as a most intriguing piece of news. As well, many international people who know something of Korea or visit to Korea always ask about this dog-eating. And then, how should we react to this issue? Should we scold them back for lacking of understanding others? Or should we really feel embarrassed about this old part of our culture and throw away like old shoes? Boshintang is apparently our traditional food habit, which can be irrational and not easy to understand for foreigners. But whenever Koreans were heard criticism or asked about it, most of them could not defend themselves or answer the question logically. We have to know that it is our responsibility to inform them the right view of thinking. I am here now to give some interesting informations about ou r eating habit to look at it in a new light. What we eat or not is patterned by culture. Some eating habits may seem disgusting to others who don't share the same culture. A sense of cultural superiority is wrong because every culture is a specialized adaptation of environment. Korea is very cold during the winter, so it was difficult to raise cattle a long time ago. Besides, bullocks were the essential farming animals that pull plows and carts. As a result, generally eating beef in Korea was very uncommon to people. So Korean started to raise dogs which grew well even in the cold weather and without special food or care to obtain insufficient nutrition. Many westerners think that dogs have been bred for centuries to be man's best friends or even family, and not to be livestock. But Korean concept of dog is very different. There are distinct differences between human and animal in Korea. Many Koreans even don't like living with any animal under the same roof of the house and get them their own home outside. As well, the family relationship has been very strong in Korea, so they don't treat dogs as pets in the western way. That's why Koreans do not have much affection for dogs, which is usually given to eat leftovers and manure traditionally.

Hw Chapter4

5. 4. You have found three investment choices for a one-year deposit: 10% APR Compounded monthly, 10% APR compounded annually, and 9% APR compounded daily. Compute the EAR for each investment choice. (Assume that there are 365 days in the year. ) Sol: 1+EAR= (1+r/k)k So, for 10% APR compounded monthly, the EAR is 1+EAR= (1+0. 1/12)12 = 1. 10471 => EAR= 10. 47% For 10% compounded annually, the EAR is 1+EAR= (1+0. 1)=1. 1 * EAR= 10% (remains the same). For 9% compounded daily 1+EAR= (1+0. 09/365)365 = 1. 09416 * EAR= 9. 4% 5-8. You can earn $50 in interest on a $1000 deposit for eight months.If the EAR is the same regardless of the length of the investment, how much interest will you earn on a $1000 deposit for a. 6 months. b. 1 year. c. 1 1/2 years. Sol: Since we can earn $50 interest on a $1000 deposit, Rate of interest is 5% Therefore, EAR = (1. 05)12/8 -1 =7. 593% a) 1000(1. 075936/12 – 1) = 37. 27 b) 1000(1. 07593? 1) = 75. 93 c) 1000(1. 075933/2 ? 1) = 116. 03 5-12. Capita l One is advertising a 60-month, 5. 99% APR motorcycle loan. If you need to borrow $8000 to purchase your dream Harley Davidson, what will your monthly payment be? Sol: Discount rate for 12 months is, 5. 99/12 = 0. 499167%C= 8000/[1/0. 004991(1-1/(1+0. 004991)60)] = $154. 63 5-16. You have just purchased a home and taken out a $500,000 mortgage. The mortgage has a 30-year term with monthly payments and an APR of 6%. a. How much will you pay in interest, and how much will you pay in principal, during the first year? b. How much will you pay in interest, and how much will you pay in principal, during the 20th year (i. e. , between 19 and 20 years from now)? Sol: a. APR of 6%/12 = 0. 5% per month. Payment = 500,000/[(1/. 005)(1- 1/1. 005360)]= $2997. 75 Total annual payments = 2997. 75 ? 12 = $35,973. Loan Balance after 1 year is 2997. 5[1/0. 005(1- 1/1. 005348)] = $493,860. Therefore, 500,000 – 493,860 = $6140 is principal repaid in first year. Interest paid in 1st year is 35,9 73 – 6140 = $29833. b. Loan balance in 19 years (or 360 – 19? 12 = 132 remaining pmts) is 2997. 75[1/0. 005(1- 1/1. 005192)]= $289,162 Loan Balance in 20 years = 2997. 75[1/0. 005(1- 1/1. 005120)] = $270,018 Therefore, Principal repaid = 289,162 – 270,018 = $19,144, and Interest repaid =$35,973 – 19,144 = $16,829. 5-20. Oppenheimer Bank is offering a 30-year mortgage with an APR of 5. 25%. With this mortgage your monthly payments would be $2000 per month.In addition, Oppenheimer Bank offers you the following deal: Instead of making the monthly payment of $2000 every month, you can make half the payment every two weeks (so that you will make 52 ? 2 = 26 payments per year). With this plan, how long will it take to pay off the mortgage of $150,000 if the EAR of the loan is unchanged? Sol: For every 2 weeks payment = 2000/2 = 1000. 1 year = 26 weeks. Therefore, (1. 0525)1/26 = 1. 001970. So, discount rate = 0. 1970%. Here, PV of loan payments is the outstandi ng balance. 150, 000= (1000/0. 001970)[1- 1/(1. 001970)N] If we solve for N,We get N= 177. 98. So, it takes 178 months to pay off the mortgage. If we decide to pay for 2 weeks, then 178*2= 356 weeks. 5-24. You have credit card debt of $25,000 that has an APR (monthly compounding) of 15%. Each month you pay the minimum monthly payment only. You are required to pay only the outstanding interest. You have received an offer in the mail for an otherwise identical credit card with an APR of 12%. After considering all your alternatives, you decide to switch cards, roll over the outstanding balance on the old card into the new card, and borrow additional money as well.How much can you borrow today on the new card without changing the minimum monthly payment you will be required to pay? Sol: Here the discount rate = 15/12 = 1. 25%. Assuming that monthly payment is the interest we get, 25,000*0. 15/12= $312. 50. This is perpetuity. So the amount can be borrowed at the new interest rate is thi s cash flow discounted at the new discount rate. The new discount rate is 12/12 = 1%. So, PV = 312. 50/0. 01 = $31,250. So by switching credit cards we are able to spend an extra 31, 250 ? 25, 000 = $6, 250. We do not have to pay taxes on this amount of new borrowing, so this is our after-tax benefit of switching cards. -28. Consider a project that requires an initial investment of $100,000 and will produce a single cash flow of $150,000 in five years. a. What is the NPV of this project if the five-year interest rate is 5% (EAR)? b. What is the NPV of this project if the five-year interest rate is 10% (EAR)? c. What is the highest five-year interest rate such that this project is still profitable? Sol: a. NPV = –100,000 + 150,000 / 1. 055 = $17,529. b. NPV = –100,000 + 150,000 / 1. 105 = –$6862. Here we need to calculate the IRR. Therefore, IRR = (150,000 / 100,000)1/5 – 1 = 8. 45%. 5-32. Suppose the current one-year interest rate is 6%.One year from now, you believe the economy will start to slow and the one-year interest rate will fall to 5%. In two years, you expect the economy to be in the midst of a recession, causing the Federal Reserve to cut interest rates drastically and the one-year interest rate to fall to 2%. The one-year interest rate will then rise to 3% the following year, and continue to rise by 1% per year until it returns to 6%, where it will remain from then on. a. If you were certain regarding these future interest rate changes, what two-year interest rate would be consistent with these expectations? . What current term structure of interest rates, for terms of 1 to 10 years, would be consistent with these expectations? c. Plot the yield curve in this case. How does the one-year interest rate compare to the 10-year interest rate? Sol: a. The one-year interest rate is 6%. If rates fall next year to 5%, then if you reinvest at this rate over two years you would earn (1. 06)(1. 05) = 1. 113 per dollar invested. This amount corresponds to an EAR of (1. 113)1/2 – 1 = 5. 50% per year for two years. Thus, the two-year rate that is consistent with these expectations is 5. 0%. b. Year| Future Interest Rate| FV from re-investing| EAR| 1| 6%| 1. 0600| 6. 00%| 2| 5%| 1. 1130| 5. 50%| 3| 2%| 1. 1353| 4. 32%| 4| 3%| 1. 1693| 3. 99%| 5| 4%| 1. 2161 | 3. 99%| 6| 5%| 1. 2769 | 4. 16%| 7| 6%| 1. 3535 | 4. 42%| 8| 6%| 1. 4347 | 4. 62%| 9| 6%| 1. 5208 | 4. 77%| 10| 6%| 1. 6121 | 4. 89%| c. We can get the yield curve by considering all EARs above. It is an inverted curve. 5-36. You are enrolling in an MBA program. To pay your tuition, you can either take out a standard student loan (so the interest payments are not tax deductible) with an EAR of 5 ? or you can use a tax-deductible home equity loan with an APR (monthly) of 6%. You anticipate being in a very low tax bracket, so your tax rate will be only 15%. Which loan should you use? Sol: APR is given, So we can get EAR by, (1+0. 06/12)12 = 1. 06168. So, EAR = 6. 168%. We have to convert the before tax rate to after tax rate. 6. 168? (1- 0. 15) = 5. 243% Since student loan is higher after tax rate, it is better to use home equity loan. 5-40. You firm is considering the purchase of a new office phone system. You can either pay $32,000 now, or $1000 per month for 36 months. . Suppose your firm currently borrows at a rate of 6% per year (APR with monthly compounding). Which payment plan is more attractive? b. Suppose your firm currently borrows at a rate of 18% per year (APR with monthly compounding). Which payment plan would be more attractive in this case? Sol: a. The payments are as risky as the firm’s other debt. So, opportunity cost = debt rate. PV(36 month annuity of 1000 at 6%/12 per month) = $32,871. So we need to pay cash. b. PV(annuity at 18%/12 per months) = $27,661. So we can pay over time.

Reflective Assignment Essay

This essay is a reflective account on my experience within the introductory period of my practice when caring for a patient. The essay will give the definition of reflection. This reflective essay will help me demonstrate how my experience in practice has helped me achieve one of the learning outcomes in my learning plan, (appendix 1). Driscoll (2000) will be used as a reflective model. The essay will explore what (description of events) so what (analysis) and now what (action plan). This essay is going to reflect on the importance of good communication with patients. Names in this essay have been changed, to respect the confidentiality of the patient and other healthcare professionals (NMC 2008). Reflection is ‘reviewing experience from practice so that it may be described, analysed, evaluated and consequently used to inform and change future practice’ (Bulman and Schutz, 2008: page 6). I was placed in an acute admissions ward at a Mental hospital. The ward is an admission ward for assessment and it admits all patients between 16-65 years for psychiatric treatment. What happened was one morning in this ward a male patient, Joe was brought in by the police, detained under Section 2 of the Mental Health Act 1983. I was assigned to admit the patient; NMC 2010a states that it is a requirement of nurses to have up-to-date and accurate records of patients. When my mentor Sarah, asked me to admit the patient, I agreed to do the admission process even though I felt I was not confident to do it, I had only observed Sarah admit a patient once. I felt I would be deemed incompetent if I turned down the opportunity to admit this patient even though I was not really confident in doing so I did not want to allow anything to work against me on this placement. I went to Joe and attempted to inform him that I was to take him through the admission process as well as to check his baseline observations. He looked at me and as if taking no notice of what I had just said started talking about how his wife betrayed him, he went on and on talking about his wife. I repeated myself but he kept on talking about his wife. In my head I thought he was just being difficult and it was time for me to check the observations of other patients. I repeated myself again telling him what I intended to do and this time Joe jumped from his sit and came very close to my face. Whilst standing very close to my personal space he shouted loudly saying â€Å"I am not going to talk to you monkeys until I speak with my GP and my Lawyer†, he then pushed me to the side and he walked off. In a state of shock I went back to Sarah and explained everything that had happened. This incident left me feeling confused and incompetent; I blamed myself for failing to perform what appeared like a simple task that my mentor had asked of me. Sarah sat down with me and explained to me that the patient was well known having been admitted on the ward several times before and is familiar to most of the staff. She thought Joe was behaving in such a way because I was new to him and also the fear of just being in a hospital away from his family contributed to his presentation. According to Chapman and Kimberly B. (2009) most patients experience the stress of being hospitalized and good communication has been identified as one of the tactics which will relieve them. Sarah took me with her to Joe, she wanted me to observe how closely she communicated with him and made him to relax. When we approached him he pointed at me and asked, ‘who is she? ’ Sarah introduced me to Joe then she asked him to come to a separate room with us. Surprisingly to me Joe did not refuse, Sarah spoke with him in an assertive but calm manner, she stated to him the importance of having his physical observations checked, this was to ensure that Joe understood the procedure for him to be able to give us his consent (NMC 2008). Joe was very co-operative and the admission process went on smoothly. I made sure I documented the procedures clearly. The second stage of Driscoll (2002) is the analysis of the events. Looking back at the way I had communicated with Joe and realized that might have contributed to the way he reacted. According to Sheldon (2004) ‘communication in nursing is a sharing of health-related information between a patient and a nurse, with both participants as sources and receivers’. Sully and Dallas (2010) also points out that communication is not just one way, it is a two way process. I realised that my communication with Joe was just one way. He was saying something to me, instead of listening I was telling him something and vice versa. No one was receiving information we were both encoding words that were not being decoded by any one. Sully and Dallas (2010) highlight how communication has need for a sender, a messenger, a receiver and a channel. When Joe asked Sarah, who I was, I realised that I had not introduced myself to him; this could be one of the reasons why he did not want to cooperate. Delvaux et al. 2004 states that to promote patient satisfaction ensure that the patient understands who you are and your specific role. Also Joe might have not understood me because when l said I wanted to check his physical observations he looked puzzled, he might not have known what an admission is nor what physical are. It was important for me to establish mutual understanding; this would have improved the outcome and help reduce his stress, (Fellowes et al 2004) From this experience l learnt that listening is an important skill to have in communication. Joe perhaps became angry about not being listened to, he did not feel valued. I realised that I should have listened to him and shown him some empathy. According to Rogers (1967) ‘empathy is the ability to feel a continuing desire to understand the client’s feelings and communications as they seem to him at the moment’. Roger (1967) also highlights that communication occurs when we listen with understanding. Just listening and trying to understand what Joe was saying could have helped me establish a therapeutic understanding with him. When Sarah was communicating with Joe she showed she was not only listening but also empathizing with him. When he mentioned about his wife betraying him Sarah was nodding her head to show she understood what he was saying. Words and language that we use sometimes only play a small part in passing on any message compared to body language, facial expressions and gestures. These will have an impact on the total sum of communication. (Hargie and Dickson 2004). Thirds stage of Driscoll is the Now what, which is my action plan, Since effective communication is extensively regarded as a key determinant of patient satisfaction, compliance and recovery it is important for me to have the suitable communication skills and to be adequately confident to use them in my clinical practice. From now when I am a student to the time I qualify my responsibility lies in improving my knowledge and skills on good communication and to be a good role model to others. Communication is a skill that I have to learn and it requires me to continually improve. In order for me to improve on my communication skills when I get back to my placement I need to have the commitment to listen more to what the patients are saying and to understand them fully. I also need to show them that I am listening and understanding them I must communicate this understanding to the patient. (Sully and Dallas, 2010). In my learning plan I stated that in order to improve my communication skills I must learn from my mentor and other health care professional as well as to research by reading more on communication. This incident has taught me that I can never say because I have been reading and learning from my mentor my communication skills are perfect. I am still learning on communication, it’s an ongoing process so I will still need to use my learning plan as well as all the information I have learnt from this incident as my primary plan. If my communication skills are well developed I will be able to manage situations now as a student as well as in the future when I qualify. Being able to manage situations can provide greater job satisfaction and it also reduces stress. (Dougherty, L. and Lister, S. 2011) In conclusion my experience taught me that communication is not just about talking, it involves, listening, looking and understanding what’s being said. Good communication builds confidence and understanding between nurse and patients and works well in improving their relationship. Communication is the basis of the relationship between the nurse and other members of the multi disciplinary team. If ever I get another opportunity to admit a patient I will start off by introducing myself and make sure that the patient understands what I am saying by giving him the opportunity to ask questions. I also learnt that if I am not confident in doing something I should talk to my mentor or any senior member of staff present and be sure on how to proceed with the allocated task. What I liked is on the same day another patient came and I was asked to do admit another patient again and I managed to do it confidently and the patient was very co operative.

Ten Steps to a Home Manicure

B. [pic] D. [pic] [pic] [pic] [pic] [pic] [pic] F. Ten Steps to Give yourself an at Home Manicure This is a fun, easy, and safe way to achieve polished fingernails without paying the higher beauty store prices when going through these ten steps. This is for adults only, or to do with adult supervision for younger girls, always keeping safety in mind, and always putting the products up safely after use. Before beginning, wash your nails thoroughly, even with the polish on your fingernails. Try to get your nails clean underneath your nail cartilage where it is not attached to the skin before beginning.If you notice growths, tiny knobs under there, or any redness or dirt substance that does not come out from under your fingernail bed, stop this process, and go to see a medical doctor. You will need: †¢ 1 pack of cotton balls  (cotton wool balls) †¢ 1 fingernail polish remover †¢ 1 emery board †¢ 1 nail trimmer †¢ 1 cuticle remover †¢ 1 bottle of fingernai l polish †¢ A couple of paper towels Nail polish removing. Firstly, take out as many cotton balls as needed one at a time, and safely douse each fingernail with nail polish remover, until your whole fingernail is your natural true color (colour).It is available now at the stores in bottle or sponge form. For the sponge type, you have to dip your finger into the container, usually a plastic one, and swish your finger around frequently checking it to make sure your fingernail polish is coming off. For the fingernail polish in the bottle (without a sponge embedded in it), you have to carefully tip it over using the cotton ball at the top to stop the liquid from spilling out and it is recommended that you have some paper towel handy to wipe off any excess fingernail polish remover that spills over as a result.Whichever fingernail polish remover you choose, swab your fingernails one by one until they are your natural color (colour). If you frequently use nail polish, your natural na il can become tinged with yellow, not to be confused with bold yellow, and not red or green, or swollen. If your fingernails or fingers start to become red, green, or swollen, seek medical attention immediately. If you are doing ok and your nails are now their natural color (colour) go to step 2. Filing your nails with an emery board. Next, you should have what is called an emery board.An emery board is usually a very inexpensive fingernail board used for filing down rough nail surfaces that is rough on the surface at least on one side. An emery board should not be used to scrape your natural nail surface at all. It will make your smooth fingernails rough. You can use the emery board quite effectively on the end of your nail, in order to give it a consistent shape and make the tip of your nail smooth, not rough. Emery board comes in all shapes and sizes, and you can even look for one to fit your personality or wardrobe color-wise.As soon as you are done smoothing the tips of your na ils in a uniform manner, proceed to the next step 3. Trimming your fingernails. A fingernail trimmer is used in your home nail process when you want to reshape or shorten your nails more efficiently than with an emery board. You can make your fingernails shorter using fingernail clippers, which are clippers that are small in size, designed to fit your nail shape and be able to cut your fingernail without doing any damage, but care should still be taken. You should trim your nails at least once a month if they are healthy.Never  trim unhealthy, discolored (discoloured) or brittle fingernails. Never trim your nails to the quick, which is the place where your fingernail cartilage meets your skin. Be mindful of safety, even at this stage of the process. If you have hypoglycemia, or any other disease such as Parkinson’s or nerves, do not clip your own fingernails if you might have an issue of safety. Some fingernails are hard and take some sharper fingernail cutters to cut throu gh them. If this is the case with yours, you may want to consider going to a salon or a simple medical visit and have a professional trim them, however, if not, trim away.This is mostly a basic and fun procedure for most people. Then start with step #4. Cuticle removing. Next, you need to use your cuticle remover to remove your cuticle, or actually push it down. Your cuticle is that soft skin that forms at the bottom of your fingernail at the place where your fingernail cartilage and your skin meet. Its job is to cover the place where your nail cartilage meets your skin, and make a smooth transition for that to happen. As your fingernails grow, your cuticle skin stretches, and this process of removing your cuticle pushes back that excess to promote your nail growth and health.Again, you would want to check your cuticle area for rashes, redness, swelling, discoloration of any kind, and if any of those issues are present in your cuticle, seek the advice of a medical professional befor e pushing it back. If you find that it looks pretty much like your fingernail and finger color (colour), but with a different smoother and softer texture, go ahead and push the cuticle back with the cuticle remover, which is a little stick like device with a softer but firm tip made especially for the cuticle.It is not a cutting type tool. It looks a little shorter than a chopstick, but has a necessary soft tipped end to make sure that your cuticle does not get damaged. Push back your cuticles one at a time using the cuticle removing tool. These are available from nearly any beauty supply store, or store that carries fingernail accessories of any kind. These are also relatively inexpensive. It is important to note that if at any time in your process your nails start to bleed mildly or a lot, stop this procedure at once.This is not likely to happen in a normal fingernail manicure, but it may be a warning of a problem with your own nails that may need medical attention. Pick a color ( colour) Now you are ready to pick out a nail polish color (colour) from your own home nail polish collection. Pick out a color (colour) that matches your skin coloring (colouring), outfit styles that you wear, or shade of lipstick. If you polish your nails frequently, make sure that you give them one or two days to air out and breathe naturally to promote healthy nails in between polishes. Application of finger nail polish color (colour)Each bottle of nail polish comes with it's own applicator inside the bottle, attached to the handle of the fingernail polish bottle. Just unscrew the top and scrape off the excess fingernail polish on the fingernail polish brush applicator on the side of the bottle itself. You can use a paper towel for this process, but you may end up with paper towel residue mixed into your color (colour) so I would not recommend it. Also, you need to make sure that you have a steady hand for this in order to get your finger nail polish on your fingernail area only, not on your skin.Skin always needs to breathe, and cannot with polish on it. When you are ready, take the applicator holding non-dripping color (colour) to your nails, brushing from the base of your fingernails upward towards the top tip of your nail. Make sure you coat your whole nail evenly. Starting at the base of the nail and applying polish in an upward motion helps you evenly coat your nail. Correcting polish mistakes. If you make a mistake, take a paper towel and douse it with nail polish remover, as you did with the cotton ball in step one, and try to get the excess polish off your skin using the flat edge of the paper towel.Then, if you need to re-coat that fingernail, go ahead. If not, great. Just move on to the next fingernail until you are done. Second coats of nail polish. Wait at least ten minutes before applying a second coat. You should not paint over your nails until the previous coat is completely dry. Without air, or low to medium speed fans blowing on them, it w ill take about five minutes for your fingernails to dry. Using high-speed fans near your wet nail polish can move your fingernail polish around your fingernail and mess its even coat up. Quick drying nails.You can buy the quick drying kind of nail polish at the stores, or a quick drying, clear sealer that is painted over the color (colour) of your nail polish to quicken drying if you are in a hurry. As a reminder,  do not attempt to polish your fingernails in an area that does not have proper ventilation  and do not polish your nails around close to infants. Save and print this article to have your own home fingernail painting party repeatedly. This is a fun and easy way to polish your own nails at home without paying the higher priced salon prices. Save this article, and print it out for your own fingernail painting party.Use this time as a de-stressing technique for you while beautifying your fingernails, or use this time as a special and fun group nail polishing time, invitin g your closest family and friends to have a home nail polish party with you. G. Growing vegetables can bring out the farmer in you. You till the soil and tend the plants, then reap the rewards when the plants bear fruit. Even if you don't have much sunny ground, you can still experience the pleasure of harvesting your own vine-ripened tomatoes and other crops. All you need is a generous-size container, good potting soil, and a suitable spot  ? patio, deck, or corner that gets at least six hours of full sun a day. If you do have actual ground for growing, containers can still help you overcome problems like poorly drained soil, pests such as gophers, and soil-borne diseases such as fusarium wilt, nematodes, and verticillium wilt. Also, since soil in pots warms up more quickly in spring than it does in the ground, you can get a tomato or pepper off to a faster start. And tall pots make it easier for gardeners with limited mobility to tend crops without kneeling or squatting. Vegetab les in containers add visual punch to the landscape.Choose large, decorative containers and surround them with smaller pots of colorful flowers, and you'll have attractive focal points  ? and a bounty of vegetables  ? all summer long. Garden designer Rosalind Creasy of Los Altos, California  (650/948-1588), even displays potted vegetables such as golden squash and fiery red peppers in her front yard (pictured above). Soil preparation and plant care Potting medium. Use a high-quality mix containing peat moss and perlite. Blend in a complete fertilizer, either a dry organic product  ? such as one containing alfalfa meal, bonemeal, kelp meal, or other natural nutrients  ? r a controlled-release type that supplies nutrients over a three- to six-month period. If you plan to water pots by hand, add soil polymers such as Broadleaf P4 (available at most garden centers) to the mix before planting to help alleviate the wet-dry cycle. As the soil dries out, these small crystals, whic h absorb a hundred or more times their weight in water, supply moisture to the roots. Feeding. If you use an organic fertilizer at planting time, supplement it with weekly applications of fish emulsion or reapply dry organic fertilizer according to package directions.If you use controlled-release fertilizer, give vegetables a boost by applying fish emulsion every two to three weeks. Watering. The best way to water vegetables in containers is with drip irrigation operated by an automatic controller. For each container, install a circle of inline emitters over the soil or distribute three or four 1/2-gallon-per-hour emitters over the soil surface (use more for very large pots). Set the controller to water often enough to keep the soil moist (in hot climates, that might be daily or every other day). If you hand-water, never allow the soil to dry out completely.Pests. If aphids, mites, or whiteflies attack, spray them with insecticidal soap or horticultural oil. Handpick and destroy tom ato hornworms. Harvest. Pick crops when they're ripe:  beans  before the seeds swell inside the pods;  cucumbers and squashwhen fruits are fully expanded but not seedy;  eggplantswhile skin is shiny;  peppers  when fully grown and showing appropriate color (green, red, or another shade);  tomatoes  when fully colored (red, orange, or yellow). Sources. Most nurseries and garden centers sell seeds and seedlings of common summer vegetables.For unusual varieties and potato tubers, try these specialists. The  Natural Gardening Company  (707/766-9303) sells certified organic seeds, potato tubers, and seedlings of eggplants, peppers, and tomatoes. Seeds of Change  sells certified organic seeds, potato tubers, and seedlings of peppers and tomatoes. Territorial Seed Company  sells seeds, potato tubers, and seedlings of eggplants, peppers, and tomatoes. I. Decide what kind of a club it will be and think up a catchy name. The club should have a topic and the people in y our club should be gathering because they share a common interest.Figure out where and when your club will meet. If you would like the meetings to be held at your school, talk about it with your other club members first. Is it just once a month or twice a week you're meeting? It's important to have these details ironed out so that your members don't get confused. Make sure everyone can get to the meetings easily. If they can't come to  every  meeting, it's okay! Begin recruiting members for your club. Most members should be among your friends, but a few people you don't know well should be allowed to join so that it will become more popular.But keep in mind, having too many members can result in a lot of anger or frustration. Establish a â€Å"government† in your club. You could include: †¢ a leader (president). They should run the club, meetings, and enforce the rules †¢ a deputy leader, who's in charge when the leader cannot make it (vice president) †¢ a treasurer. They should handles the club monies, and keep track of dues for memberships, pay the bills for the clubs operations and activities. They should also keep records of all debits and credits for accounting purposes. †¢ a secretary. They should keep minutes f every meeting and read them for correction or addition at each consecutive meeting. They can assist with the activities of the club, such as events that are hosted, and give a report of the event at meetings that follow these events. †¢ a historian. They should keep a record of activities that the club hosts, etc. †¢ a head of Events. They should delegate club members to help in planning organized activities. †¢ an advertising team. They should be responsible for creating flyers etc. Decide on a club symbol, colors, etc. This should also be decided by the club and voted on.Make club IDs. Make a template with your name, the club's name, the member's rank (if they have one), contact info for the club, c lub location, and the time since they became a member. Get a motto/slogan. This step is optional, but it can help to keep everyone in the club on the right track. Make it inspirational. Have your first meeting. It's best to have snacks and some kind of games to make a good impression. Call members to remind them of the first meeting, as it's best if everyone attends. Keep moving forward. Have a good constitution to help clarify what you want to do and how.Help your officers to know what they should do and how to behave. There are books to guide you in these things – get one. J. Start small. Don't run for class president your first year out. Try one of the other positions, instead. If you're new at the school, try volunteering for a position that's not elected your first year, such as yearbook or newspaper. It will be a way to get to know classmates and the school and gain experience before you run. Recognize your strengths and interests. For example, if you like writing, run for secretary. If you're a leader, try president. Make promises.If you make promises that are appealing to the majority of people many of those people will vote for you. For example say you'll create a 5 minute break in the day. Collect a dedicated following made of friends. If they yell, shout and campaign for you people will get into mood and will think it is cool to vote for you. If you get elected president, make all of your possible promises come true, and try to make a good one, so you can get elected once more. Advertise! you're not going to win if people don't know you're running. Put up posters, hand out flyers or buttons, chalk the sidewalks around campus.Do anything you can do to get your name out there. However, make sure it doesn't go against the school rules. L. Instructions Torn Hem o 1 Trim or pull out any loose threads. Do this carefully so that you only attend to the area around where the hem has come down, and do not accidentally remove the stitching from the enti re of the dress's hem. o 2 Pin hem back into position. o 3 Thread your needle with as close to the same colored thread as you can manage so that your repair will be unnoticeable. o 4 Do slip stitches to repair the hem when you fix a torn dress.To do slip stitches, tie a knot in your thread, and pass your needle through a very small portion of the fabric on the back-side of the dress as possible. Draw the thread through this small portion until you reach the knot. Push the head of the needle through the top of the folded portion of the hem, then push the needle out again. Pass the needle through a portion of fabric above the hem, draw the thread through until you reach the end without pulling so you don't pucker the fabric, pass the needle into the top, folded portion of the hem, and repeat. Torn Seam o 5Take out or cut any loose threads, being careful to not remove any thread in the portion of the seam that is still OK. o 6 Pin the seam back together. o 7 Sew the seam back together by hand or with a machine, being careful to overlap the areas on both sides of the ripped seam that are still intact. Torn Button o 8 Replace a torn button by first removing the thread that remains in the dress when you try to repair it. o 9 Choose a thread that closely matches the thread that's being used for the buttons on the other dress. o 10 Be careful to sew on the button in the same fashion as the other buttons when you fix a torn dress.If the button is attached via a built-in loop or shank on the button's bottom, this isn't as much of a concern. However, if the button has four holes, make sure you sew it on in the same pattern, which will be either diagonally or vertically. o 11 Start sewing the button on from the back of the torn dress. o 12 Tie a knot in the thread, push the needle through the hole in the button and through the front of the dress, then pass the needle through the button and toward the back of the dress in either the hole above it or the hole diagonally fro m it. 13 Repeat until you get the amount of thread on the button you wish, then go on to the next group of holes. o 14 Finish the button by passing the needle up through and back through the button, but do not pierce the fabric of the torn dress yet. Loop the thread several times around the thread just beneath the button and on the top side of the dress, pass the needle up through one of the holes of the button, then back down the other hole to the back of the dress, and make a knot before cutting the thread.M. Getting good grades on exams is a dream of every student. But term papers can be overwhelming for many students who want to get good scores but don’t like to write. However, term papers are compulsory if you really want to succeed in academics. Writing a good term paper might not be as hard as many students think. It requires good organizational skills, good research, and immediate action instead of waiting till the last moment. Below are some tips to help you know how to write a term paper on time.